Customs and Trade Terms

Free Trade Zone

A free trade zone (FTZ) is a designated area within a country's territory where goods can be imported, stored, handled, manufactured, and re-exported under special customs regulations without standard import duties applying.

Duties are suspended — not eliminated — inside a free trade zone. Goods entering an FTZ do not enter the domestic customs territory; the duty liability activates only when goods leave the zone for the domestic market. Goods re-exported directly from an FTZ to another country never trigger the domestic duty at all. Major European FTZs are established around the Port of Antwerp, Hamburg, and Rotterdam — consolidation and processing points for goods moving through the EU before their final market destination is confirmed. The free trade zone is strategically relevant for importers who need to inspect, repackage, or consolidate cargo before committing to a single domestic market.

Declared Value

The declared value is the monetary value of a consignment stated by the shipper to the carrier and to the customs authority — used to calculate import duties, determine carrier liability limits under CMR, and establish cargo insurance premiums.

3 frameworks use declared value simultaneously for the same consignment. Customs valuation under UCC Article 70 uses the transaction value — the price actually paid — as the primary basis for duty calculation. CMR carrier liability defaults to 8.33 SDR per kilogram of gross weight lost or damaged unless the shipper declares a higher value on the CMR consignment note. Cargo insurance uses the declared value as the insured sum — understating the value to reduce the premium creates a recovery gap in the event of a claim. The declared value must reflect the actual commercial transaction value across all 3 contexts; misrepresenting it for duty purposes constitutes customs fraud under UCC enforcement provisions.

Exporter

An exporter is the party that sends goods out of the customs territory of the country of origin — legally responsible for the export declaration, the accuracy of the commodity codes declared, and any applicable export licence requirements.

The exporter holds the EORI number used on the export declaration and is the legal entity accountable to the customs authority for the contents of that declaration. The exporter and the consignor — the party that physically dispatches the goods — are often the same entity but not always. Under Incoterms EXW (Ex Works), the buyer takes on export formalities at the point of collection and becomes the exporter for customs purposes — even though the seller is physically located at the collection address. The legal responsibility for export compliance follows the declared exporter on the declaration, not the party who physically packed or shipped the goods.

Importer

An importer is the party that receives goods into the customs territory of the destination country — responsible for submitting the import declaration, paying applicable duties and taxes, and complying with the destination country's import regulations.

The importer holds the EORI number used on the import declaration at the destination customs office. Under Incoterms DDP (Delivered Duty Paid), the seller takes on import responsibilities at the destination — acting as importer of record in the buyer's country. Under EXW or FCA terms, the buyer is the importer. The importer and the consignee — the party physically receiving the goods — are often the same entity, but in arrangements involving distributors, agents, or bonded warehouses they are frequently different. The importer's EORI number must appear on the import declaration before the consignment can be processed at the border.

Export Shipping

Export shipping is the process of sending goods from one country to another across an international border — triggering export declaration requirements, customs clearance obligations, and documentation requirements at the point of departure.

EU export shipping to a third country involves submitting an export declaration to the competent customs authority, receiving the accepted Export Accompanying Document (EAD) with its Movement Reference Number (MRN), and presenting the goods and EAD at the EU border exit point. The exit scan at the border office closes the export declaration in the Automated Export System and generates the proof of export required for zero-rate VAT on the sale. Intra-EU movements involve no export shipping formalities — the term applies only when goods cross an EU external border. Export shipping from Belgium to the UK now follows the same process as export to any other third country, with all documentation confirmed before the carrier collects the goods.

Reverse Charge VAT

The reverse charge is a VAT accounting mechanism that shifts responsibility for accounting for and paying VAT from the supplier to the buyer in cross-border B2B transactions.

The supplier issues a zero-rated VAT invoice under the standard reverse charge — the buyer self-accounts for VAT at the applicable local rate in their own periodic return. The supplier does not register for VAT in the buyer's member state. In the Belgian customs context, Article 23 / ET 14000 allows VAT-registered importers to account for import VAT through their periodic VAT return rather than paying it at the border at the time of entry — an import VAT deferment mechanism operating on the reverse charge principle. The reverse charge is the mechanism that makes cross-border B2B VAT administratively manageable across 27 EU member states with different VAT rates and regulatory systems.

Country of Entry

The country of entry is the first EU member state through which goods arriving from outside the EU customs territory cross the external border — the customs authority of that member state processes the import declaration and collects applicable duties.

For road freight entering the EU, the country of entry is where the truck crosses the EU land border or where a ferry carrying the vehicle docks at an EU port. The import declaration is submitted to the customs office at the country of entry unless a transit procedure defers clearance to the final destination member state. Goods move under customs supervision through the country of entry to the destination customs office under the T1 transit procedure — import clearance and duty collection take place at that destination office rather than at the border crossing. The country of entry determines which EU customs authority holds jurisdiction over the import — directly relevant for consignments entering the EU through Belgium en route to Germany, France, or other member states.

Special Drawing Rights

Special Drawing Rights (SDR) are an international monetary reserve asset created by the IMF in 1969, used in logistics as the unit of account for carrier liability limits under the CMR Convention.

CMR Article 23 caps road freight carrier liability at 8.33 SDR per kilogram of gross weight of goods lost or damaged in transit. The SDR is not a tradeable currency — it is an accounting unit whose value is recalculated daily by the IMF based on a weighted basket of 5 currencies: the US dollar (43.38%), the euro (29.31%), the Chinese renminbi (12.28%), the Japanese yen (7.59%), and the pound sterling (7.44%). A shipper overrides the 8.33 SDR/kg default by declaring a higher consignment value on the CMR consignment note. Special Drawing Rights connect the IMF's international monetary architecture to the practical claim calculation that governs every cross-border road freight loss in Europe.

Binding Tariff Ruling

A Binding Tariff Ruling (BTI) is a legally binding decision issued by a national customs authority confirming the correct commodity classification for specific goods — valid for 3 years and enforceable across all EU member states.

The BTI is issued following an application to the national customs authority (in Belgium: FOD Financiën) by the trader or their customs agent. Once issued, both the trader and the customs authority are bound by the ruling — the stated commodity code applies to the described goods for the full 3-year validity period. The EU EBTI-3 database holds all BTIs issued across member states and is publicly searchable. A trader with a valid BTI cannot have a different commodity code applied to those goods at any EU border during the validity period. The Binding Tariff Ruling eliminates classification disputes at the border and gives the trader legal certainty on duty rates, quota entitlements, and applicable restrictions before the goods move.

Compliance Certificate

A compliance certificate is a document confirming that goods meet the regulatory standards and technical requirements of the destination market — required for product categories subject to mandatory conformity assessment.

Product categories requiring compliance certificates include machinery (EU Machinery Directive 2006/42/EC), low-voltage electrical equipment (LVD 2014/35/EU), toys (Directive 2009/48/EC), and medical devices (MDR 2017/745). The certificate is issued by an accredited conformity assessment body or by the manufacturer under a declaration of conformity framework. It is distinct from CE marking — the visible label on the product — and from the EU Declaration of Conformity, which is the manufacturer's own statement. Goods without a required compliance certificate are held at the EU border for inspection and returned to origin at the shipper's cost when the certificate cannot be produced.

Related Customs and Trade Terms

The following customs and trade concepts are covered in full on dedicated pages in the Go Trans customs cluster and guides. Each reference connects to the page that holds the complete definition, regulatory context, and practical guidance for that term.

The EORI number — Economic Operators Registration and Identification number — is mandatory for all businesses importing or exporting goods across EU external borders. Belgian businesses register through the CBE/KBO before their first cross-border commercial shipment.

The CMR consignment note is the legally required freight transport contract for all cross-border road freight under the CMR Convention — issued at the point of collection, travelling with the goods to the delivery address, and signed by carrier and recipient at handover.

The commercial invoice states the commercial value of the goods and is required for customs clearance at EU external borders and at the UK border. The declared value on the commercial invoice is the primary basis for duty calculation.

UK customs clearance is the post-Brexit process for goods crossing the UK–EU border in either direction — required since 1 January 2021 for all commercial consignments regardless of value, weight, or mode of transport.

Customs duties are tariffs charged on goods entering a customs territory from abroad — calculated as a percentage of the customs value and determined by the commodity code and the declared country of origin.

The certificate of origin confirms where goods were manufactured — used to determine preferential duty rates under EU free trade agreements and to comply with origin-specific import regulations in destination markets.

The export declaration is the formal submission to the customs authority required before goods leave the EU customs territory to a third country — the accepted declaration generates the Export Accompanying Document and the Movement Reference Number.

Incoterms are the ICC's internationally standardised commercial terms defining delivery responsibilities, risk transfer points, insurance obligations, and customs compliance duties between buyers and sellers in international trade contracts.

Cross-Border Freight Across Europe